2025-08-05How to resolve signal imbalance issues on an RF power divider

Signal imbalance may be caused by loose or poor connections....

2025-08-04How to Optimize Port Isolation on an RF Power Divider

Relying on sophisticated structural design, the internal transmission paths of the RF power divider must be precisely laid out to ensure even signal distribution at branching nodes...

2025-08-04How to Optimize Port Isolation on RF Power Dividers

Optimizing internal structural design is key to improving port isolation. Signal paths for each port must be rationally planned to avoid crossing or excessively close paths, thereby reducing electromagnetic coupling between ports. Isolation barriers can be added between ports...

2025-08-02How to Effectively Test the Power Capacity of an RF Power Divider

Establish a suitable test environment and ensure that the test site is free of strong electromagnetic interference to avoid affecting the accuracy of test results...

2025-08-02How to Select an RF Power Divider for a Specific Frequency Range

Different RF power dividers have specific effective operating frequency bands, which need to be matched to the frequency range of the signals in your system...

2025-08-01What are the correct installation steps for a high-power coupler

When operating at high power, high-power couplers tend to generate strong electromagnetic fields....

2025-08-01What are the correct installation steps for a high-power coupler

preparation. First, inspect the high-power coupler's exterior to ensure it is in good condition and that there are no damage to the casing or deformed connectors...

2025-07-31How to Fix Signal Attenuation in a High-Power Coupler

First, check the connections for abnormalities. Signal attenuation is often caused by loose connectors or poor contact....

2025-07-31Key Application Considerations for High-Power Couplers in 5G Base Stations

5G base stations transmit high signal power, requiring high-power couplers to stably handle high-power signals to avoid performance degradation or damage due to power overload...

2025-07-30How does the directional coupler effectively resist external electromagnetic interference

A dedicated internal shielding layer forms a physical barrier to block the intrusion of external electromagnetic fields...

2025-07-30How is the electromagnetic compatibility of the directional coupler

The structural design includes shielding layers and isolation components, effectively preventing the impact of external electromagnetic fields on internal signal transmission....

2025-07-29How to test the performance of the Directional coupler

The signal source can be connected to the main input end of the coupler, and the power meter can be connected to the main output end and the secondary output end respectively...